The ADD Vise - 6" Wire EDM Vise - Package #4 - Pro Series 1

Description

THE ADD VISE Package #4 Pro Series 1 -
00.00
This package includes our 6” Vise, small jaw set, leveling head, clamping blocks (2), granite surface plate, " T " wrench for X, Y, Z and camber adjustments, brass tapper, all applicable hardware and carrying case.
This product will fit any model EDM machine.
This 6" vise set with the small jaw set will accommodate a part up to 6.9" wide Our unique "Taper Lock" design locks the jaws in place with just a tap from the included brass tapper. The unused "Taper Lock" areas allow you the ability to pick up the back side of work pieces, unlike our competition. The vise is also marked with a numbering system 1-6 for solid jaw placement. For example, if you have a 5" block, the solid jaw must be in the 5 position to fit that size block.
If purchasing this model, you may also be interested in purchasing our Package #6 Production Upgrade which includes a second 6" vise with leveling head and small jaw set.
THE
ADD
VISE is a truly economical, precision vise for EDM professionals that do not have “Blank Check” tooling budgets. It was designed by two EDM guys who were tired of the high cost and ineptness of what was available by the current manufacturers.
We found that you had two options with the current manufacturers. Either go “All In” and spend a lot of money to get what you really want / need (even if it isn’t in your budget), or buy what you can afford now, and when you can afford it, pay full price again for what you wanted / needed in the first place.
With THE
ADD
VISE, you can buy what you can afford now, and
ADD
pieces later as you can afford them, to build what you really wanted / needed from the start.
No more wasted tooling dollars by buying a basic table vise from the current manufacturers, that will end up getting thrown in a drawer at a later date and forgotten, when you can finally afford to buy a complete package vise with  leveling head that you really wanted.
THE
ADD
VISE eliminates the wasted tooling dollars by engineering our basic table vise to be fully upgradeable. We pre-machine each vise to be able to work with every additional component we offer.
By purchasing The Package #2 Starter kit ( basic 6” table vise, small and large jaw set), which bolts directly onto your EDM table, then at a later date
ADD
ing our Package #3 Starter Upgrade ( leveling head, clamping blocks, granite surface plate and  “ T “ wrench).  You now have the Pro Series 2 you wanted all along.
We also didn’t like the fact that you need to buy a different vise for each and every different shape or size of part you needed to hold. A vise for square parts, a vise for round parts, a vise for thin parts, a vise for heavy blocks, etc.  And don’t forget about the “Nice, Expensive” cabinet you’ll need, just to hold all your different vises.
With our unique “Taper Lock” design, there is no longer a need to buy another vise for each and every different holding need you come across.  It’s just a matter of swapping out a set of jaws.
With THE
ADD
VISE, we are also able to customize a set a jaws to fit any holding need you have, no matter the shape.  Just send us the shape and we can design a set of jaws to hold it.  We already have small squeeze jaws for holding rounds.  If you prefer, v-block jaws, we have those in various sizes in stock too.
THE
ADD
VISE is the last EDM vise you will need to buy. It’s the most VERSATILE – CUSTOMIZABLE – ADAPTABLE vise on the market today.